Engineering College
Answers
Answer 1
The velocity vector of point C with respect to point B is (-1.5ωj^ + 2.598ωi^) ft/s.
How to solve
Given:
Coordinate of C = (0, 0, 0) ft
Coordinate of B = (-3cos30°, 3sin30°) ft = (-2.598, 1.5) ft
r_BC = (3cos30° i^ - 3sin30° j^) ft = (2.598i^ - 1.5j^) ft (position vector for point C with respect to B)
ω_BC = ω_AB = ω (since link AB and link BC are connected and rotating together)
The velocity of point C with respect to point B is given by:
v_CB = ω_BC x r_BC
Since link BC rotates in the counter-clockwise direction, the direction of ω_BC is in the positive z direction, i.e., ω_BC = ωk^.
Substituting the values,
v_CB = ω_BC x r_BC
= ωk^ x (2.598i^ - 1.5j^) ft
= (-1.5ωj^ + 2.598ωi^) ft/s
Therefore, the velocity vector of point C with respect to point B is (-1.5ωj^ + 2.598ωi^) ft/s.
Given:
v_C = (6.5 ft/s) j^
v_CB = (2.6ω_BC j^ + 1.5ω_BC i^) ft/s
v_B = -ω_AB i^
The velocity of point C is given by:
v_C = v_CB + v_B
Substituting the given values,
(6.5 ft/s) j^ = (2.6ω_BC j^ + 1.5ω_BC i^) ft/s + (-ω_AB i^)
Equating the components of the vectors on both sides, we get:
2.6ω_BC = 0
1.5ω_BC - ω_AB = 0
Solving these equations, we get:
ω_BC = 2.5 ft/s
ω_AB = 1.5 ft/s
Substituting the value of ω_BC in v_CB, we get:
v_CB = (2.6 x 2.5 j^ + 1.5 x 2.5 i^) ft/s
= (3.25 i^ + 6.5 j^) ft/s
Substituting the values of v_CB and v_B in v_C, we get:
v_C = v_CB + v_B
= (3.25 i^ + 6.5 j^) ft/s + (-1.5 ω_AB i^) ft/s
= (3.25 - 1.5ω_AB) i^ + 6.5 j^ ft/s
= (3.25 - 1.5 x 1.5) i^ + 6.5 j^ ft/s
= 0.5 i^ + 6.5 j^ ft/s
Therefore, the velocity vector of point C is (0.5 i^ + 6.5 j^) ft/s.
Given:
ω_BC = 2.5 ft/s
ω_AB = 1.5 ft/s
From equation (2):
1.5ω_BC - ω_AB = 0
Rearranging the equation, we get:
ω_AB = 1.5ω_BC
Substituting the value of ω_BC, we get:
ω_AB = 1.5 x 2.5 rad/s
= 3.75 rad/s
Therefore, the angular velocity of link AB is 3.75 rad/s.
Read more about angular velocity here:
https://brainly.com/question/6860269
#SPJ1
Related Questions
write a method called arraytimesfive the method takes one array of doubles as a parameter it multiplies each element in the array by 5 and stores the result it returns nothing
Answers
Here's an example of how you could write the "arraytimesfive" method in Java:
```java
public static void arraytimesfive(double[] arr) {
for (int i = 0; i < arr.length; i++) {
arr[i] *= 5;
}
}
```
This method takes in an array of doubles as a parameter (named "arr"), multiplies each element in the array by 5, and stores the result back into the same array. It doesn't return anything (hence the "void" return type).
To use this method, you would simply pass in an array of doubles as an argument, like so:
```java
double[] myArray = {1.0, 2.5, 3.2, 4.7};
arraytimesfive(myArray); // This will modify myArray in place
```
After this code runs, the "myArray" variable will have been modified so that its contents are now {5.0, 12.5, 16.0, 23.5}.
Know more about Java here:
https://brainly.com/question/29897053
#SPJ11
A franchise agreement between Software2 Company and Games3, Inc., is silent on a time for termination of the franchise. Software2 may a. never terminate. b. terminate at any time. c. terminate on reasonable notice. d. terminate on three days notice.
Answers
A franchise agreement between Software2 Company and Games3, Inc., is silent on a time for termination of the franchise. Software2 may terminate on reasonable notice. The Option C is correct.
What is termination of a franchise agreement ?
The franchisor cancels the agreement before the end of the contract term in a termination, whereas a non-renewal occurs when the franchisor refuses to renew the agreement at the end of its term.
A franchisor or franchisee may attempt to terminate an agreement before the term expires. The termination options for both the franchisor and the franchisee must be specified in the franchise agreement and summarized in the disclosure document.
Read more about franchise
brainly.com/question/3687222
#SPJ1
At what instance do you use (Scanner scan = new Scanner (System.in) in Java? What does Scanner mean?
Answers
In Java, you use the Scanner class to read input from the user or from a file. You create an instance of the Scanner class by declaring a variable of type Scanner and calling the constructor with the appropriate arguments.
In the case of reading input from the user via the command line, you create an instance of Scanner with the System. In parameter. This is done at the point in your code where you need to read input from the user.
For example, if you want to prompt the user to enter their name, you would create a Scanner instance like this:
Scanner scan = new Scanner(System.in);
Then, you can use the methods of the Scanner class to read input from the user. For example, to read a string input, you would use the nextLine() method:
String name = scan.nextLine();
In this example, the Scanner instance "scan" is created at the point where we need to read input from the user (in this case, the user's name). "Scanner" is a class in Java that provides methods for reading input from various sources
Learn more about Scanner here:
https://brainly.com/question/17102287
#SPJ11
make a dict out of a flipped tuple python
Answers
In Python, a tuple is an immutable sequence of elements that are separated by commas and enclosed in parentheses. Flipping a tuple refers to reversing the order of the elements in the tuple. To create a dictionary out of a flipped tuple in Python, you can use the built-in function dict().
First, you need to create a tuple with the key-value pairs you want to include in the dictionary. Then, you can use the built-in function reversed() to flip the order of the elements in the tuple. Finally, you can pass the flipped tuple to the dict() function to create a dictionary.Here is an example of how to make a dict out of a flipped tuple in Python:
```python
# Create a tuple with key-value pairs
my_tuple = (1, 'one', 2, 'two', 3, 'three')
# Flip the tuple
flipped_tuple = reversed(my_tuple)
# Create a dictionary from the flipped tuple
my_dict = dict(flipped_tuple)
# Print the dictionary
print(my_dict)
```
Output:
```
{'three': 3, 'two': 2, 'one': 1}
```In this example, we created a tuple with key-value pairs, flipped the tuple using the reversed() function, and created a dictionary using the dict() function. The resulting dictionary has the keys and values reversed from the original tuple.
For such more question on Python
https://brainly.com/question/28675211
#SPJ11
The velocity in a certain flow field is given by the equation V = xi + x^(2)zj + yzk.
a) Determine the expressions for the three components of acceleration in x, y, and z directions and the total acceleration vector (a = axi + ayj + azk) for this flow.
Answers
The total acceleration vector (a = axi + ayj + azk) is a = xi + 0j + yzk = xi + yzk.
The given velocity equation is V = xi + x^2zj + yzk.
a) To determine the expressions for the three components of acceleration in x, y, and z directions and the total acceleration vector, we first need to find the partial derivatives of the velocity components with respect to time.
First, let's find the velocity components:
u = x
v = x^2z
w = yz
Next, we differentiate each velocity component with respect to time and their respective coordinates:
du/dt = d(x)/dt = 0 (since x does not depend on time)
dv/dt = d(x^2z)/dt = 0 (since x and z do not depend on time)
dw/dt = d(yz)/dt = 0 (since y and z do not depend on time)
Now, we find the convective acceleration terms by multiplying the velocity components by their respective partial derivatives with respect to x, y, and z:
du/dx = u*(du/dx) = x*(1) = x
dv/dy = v*(dv/dy) = (x^2z)*(0) = 0
dw/dz = w*(dw/dz) = (yz)*(1) = yz
Finally, we sum up the temporal and convective acceleration terms to find the acceleration components in x, y, and z directions:
ax = du/dt + du/dx = 0 + x = x
ay = dv/dt + dv/dy = 0 + 0 = 0
az = dw/dt + dw/dz = 0 + yz = yz
So, total acceleration vector (a = axi + ayj + azk) is:
a = xi + 0j + yzk = xi + yzk.
Learn more about Acceleration: https://brainly.com/question/460763
#SPJ11
Can Pinacolone Under Go This Sort Of Reaction By Itself To Give A High Yield Of Product? 5) A. Yes Or No (Circle One) B. Describe How You Came To Your Conclusion.
Answers
No, Pinacolone cannot undergo this sort of reaction by itself to give a high yield of product.
This is due to the fact that the reaction requires an oxidizing agent to produce the ketone group. Pinacolone is a ketone that has previously been oxidized and cannot be further oxidized in the absence of a suitable oxidizing agent. As a result, a sufficient oxidizing agent, such as potassium permanganate or sodium dichromate, is required for the reaction to produce the desired product. The reaction will not take place unless an oxidizing agent is present, and no product will be generated.
As a result, based on the reaction chemistry, it is obvious that Pinacolone cannot undertake this type of reaction on its own to produce a large yield of product.
Learn more about Pinacolone:
https://brainly.in/question/44297786
#SPJ11
Determine the moments acting at the ends of each member of the frame shown in the figure below. Assume the joints D and C are fixed connected, and the supports at A and B are fixed. EI is constant. Use the Moment-Distribution Method to conduct your analysis.
Answers
The moments acting at the ends of each member of the frame can be determined using the Moment-Distribution Method, which is a structural analysis technique used to calculate the moments and shears in a frame structure. Based on the given information, the joints D and C are fixed connected, and the supports at A and B are fixed, which means that the structure is statically determinate.
To determine the moments acting at the ends of each member of the frame using the Moment-Distribution Method, we follow these steps:
1. Assign fixed-end moments to each member based on the fixed supports and connections at joints D, C, A, and B.
- Member AD: M_AD = 0
- Member DC: M_DC = -6EI/L
- Member CB: M_CB = 0
- Member BA: M_BA = 6EI/L
2. Create the distribution factors for each member by dividing the length of the member by the sum of the lengths of all members meeting at the joint.
- Joint D: DF_AD = DF_DC = 1/2
- Joint C: DF_DC = DF_CB = 1/2
- Joint B: DF_CB = DF_BA = 1/2
- Joint A: DF_BA = DF_AD = 1/2
3. Determine the carry-over factors for each member by multiplying the distribution factors of the two joints at their ends.
- Member AD: COF_AD = DF_AD x DF_BA = 1/4
- Member DC: COF_DC = DF_DC x DF_AD = 1/4
- Member CB: COF_CB = DF_CB x DF_DC = 1/4
- Member BA: COF_BA = DF_BA x DF_CB = 1/4
4. Calculate the fixed-end moments at each joint by distributing the moments at each end using the distribution and carry-over factors.
- Joint D: M_D = 0 + COF_AD x M_AD + COF_DC x M_DC = -3EI/L
- Joint C: M_C = M_DC + COF_CB x M_CB + COF_AD x M_D = -9EI/L
- Joint B: M_B = 0 + COF_CB x M_C + COF_BA x M_BA = 6EI/L
- Joint A: M_A = M_BA + COF_AD x M_D + COF_BA x M_B = 3EI/L
Therefore, the moments acting at the ends of each member of the frame are:
- Member AD: M_AD = 0, M_D = -3EI/L
- Member DC: M_DC = -6EI/L, M_C = -9EI/L
- Member CB: M_CB = 0, M_B = 6EI/L
- Member BA: M_BA = 6EI/L, M_A = 3EI/L
Learn more about Distribution methods:
https://brainly.com/question/1905493
#SPJ11
showScores(nplayers, S) takes nplayers, an integer, and S, alist of# integer values representing the current score in the game,and# produces a string suitable for printing that represents thecurrent state.## For example:# >>> showScores(3, [10, 44, 13])# '1:10, 2:44, 3:13'# >>> showScores(4, [10, 44, 13, 0])# '1:10, 2:44, 3:13, 4:0'# Pay close attention to the spacing and punctuation.## See HW1 for additional context.## Note: you will need to use a comprehension.#def showScores(nplayers, S):pass
Answers
The function showScores(nplayers, S) takes in an integer nplayers and a list of integer values S representing the current score in the game. It produces a string that represents the current state of the game with each player's number and score separated by a colon and comma.
The output string includes all the players and their corresponding scores, and has the format "1:score1, 2:score2, ..., nplayers:scorenplayers".
The function showScores(nplayers, S) takes two arguments: an integer nplayers representing the number of players in the game, and a list S containing the current scores of each player.
To generate the output string, the function uses a list comprehension that iterates over the range of nplayers and formats the index plus one (to match the player number) and the corresponding score from the list S into a string in the format "player_number:score".
The formatted strings are then joined using the string method join(), with a comma and space as the separator between each formatted string. The resulting string is returned as the output of the function. The final string has the format "1:score1, 2:score2, ..., nplayers:scorenplayers" with each player's number and score separated by a colon and comma.
For more questions like Function click the link below:
https://brainly.com/question/16008229
#SPJ11
22. Given the following function: int strange(int x, int y) if (x > y) return x + y; else return x-y; what is the output of the following statement? cout << strange(4, 5) << endl; a. b. -1 1 c. 9 d. 20 ANSWER:
Answers
The output of the given C++ statement cout << strange(4, 5) << endl; will be -1.
The function Strange accepts two integer parameters, x, and y, and returns the sum of x and y if x is larger than y, else the difference between x and y. In this situation, x equals 4 and y equals 5. Because 4 is not larger than 5, the method returns the -1 difference between x and y.
When called within the court statement, the function returns -1, which is then printed on the console. To insert a new line after the output, use the endl manipulator.
It should be noted that the function's output is determined by the values of its input parameters. The function's output may alter if various values were provided to it. Because x is smaller than y in this situation, the function returns the difference between the two numbers, resulting in a negative output.
Learn more from C++ programming:
https://brainly.com/question/23275071
#SPJ11
the frequency response function used herein during the sweep was out/in = acceleration / force, explain what this means in the bode
Answers
The frequency response function out/in = acceleration/force would be used to analyze the behavior of a system in response to a force input, and the bode plot would provide a visual representation of the system's gain and phase response across different frequencies.
The frequency response function describes the relationship between the input and output signals of a system in the frequency domain. In this case, the function used was out/in = acceleration/force, which means that the output signal is acceleration and the input signal is force.
When analyzing this function in the bode plot, we would plot the magnitude and phase response of the system as a function of frequency. The magnitude response would show the gain of the system at each frequency, indicating how much the output signal (acceleration) is amplified compared to the input signal (force). The phase response would show the phase shift between the input and output signals at each frequency.
Know more about frequencies here:
https://brainly.com/question/5102661
#SPJ11
suppose we have a shipment of 50 microprocessors, of which 4 are defective. in how many ways can we select a set of four microprocessors, containing exactly two defective micro- processors?
Answers
There are 6,210 ways to select a set of four microprocessors containing exactly two defective microprocessors from the shipment of 50 microprocessors.
What are the steps to find the number of ways to select a set of four microprocessors containing exactly two defective microprocessors from a shipment of 50 microprocessors?
To find the number of ways to select a set of four microprocessors containing exactly two defective microprocessors from a shipment of 50 microprocessors, you can use the following steps:
Calculate the number of ways to choose two defective microprocessors from the four defective ones. This can be done using combinations: C(4, 2) = 4! / (2!(4-2)!) = 6.
Calculate the number of ways to choose two non-defective microprocessors from the remaining 46 microprocessors (50 total - 4 defective = 46 non-defective). This can also be done using combinations: C(46, 2) = 46! / (2!(46-2)!) = 1,035.
Multiply the results of steps 1 and 2 to find the total number of ways to select a set of four microprocessors with exactly two defective ones: 6 ˣ 1,035 = 6,210.
So, there are 6,210 ways to select a set of four microprocessors containing exactly two defective microprocessors from the shipment of 50 microprocessors.
Learn more about microprocessors
brainly.com/question/1305972
#SPJ11
Write a Java program that has a method called diceSum() which accepts a Scanner object as a parameter that prompts for a desired sum from a user, then repeatedly simulates the rolling of 2 sixsided dice until their sum is the desired sum (you should use a while loop)
Answers
Here is a possible solution in Java:
import java.util.Scanner;
import java.util.Random;
public class DiceRoller {
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
System.out.print("Enter the desired sum: ");
int desiredSum = input.nextInt();
diceSum(input, desiredSum);
}
public static void diceSum(Scanner input, int desiredSum) {
Random rand = new Random();
int dice1 = rand.nextInt(6) + 1; // roll first dice
int dice2 = rand.nextInt(6) + 1; // roll second dice
int sum = dice1 + dice2;
while (sum != desiredSum) {
System.out.println("Rolling the dice again...");
dice1 = rand.nextInt(6) + 1;
dice2 = rand.nextInt(6) + 1;
sum = dice1 + dice2;
}
System.out.println("You rolled " + dice1 + " and " + dice2 + " for a total of " + sum);
}
}
In this program, the diceSum() method accepts a Scanner object and an integer as parameters. The Scanner is used to prompt the user for the desired sum, and the integer is the sum that we are trying to achieve. Inside the method, we use a Random object to simulate the rolling of two six-sided dice, and then we check if their sum is equal to the desired sum. If not, we roll the dice again until we get the desired sum. Once we get the desired sum, we print out the result. The while loop is used to repeat the rolling of the dice until the desired sum is achieved.
Learn more about Java here:
https://brainly.com/question/29897053
#SPJ11
The diffusion coefficient for Cr3+ in Cr2O3 is 6 × 10–15 cm2/s at 727°C and 1 × 10–9 cm2/s at 1400°C. Calculate (a) the activation energy; and (b) the constant D0.
Answers
The diffusion coefficient for Cr3+ in Cr2O3 is 6 × 10⁻¹⁵ cm²/s at 727°C and 1 × 10⁻⁹ cm²/s at 1400°C then the activation energy is 410 kJ/mol and the constant D0 is 2.2 × 10⁻³ cm²/s.
We can use the Arrhenius equation to relate the diffusion coefficient to temperature and the activation energy:
D = D0 * exp(-Q/RT)
where D is the diffusion coefficient,
D0 is the pre-exponential constant,
Q is the activation energy,
R is the gas constant, and
T is the absolute temperature.
We can solve for Q and D0 by using the given diffusion coefficients and temperatures:
At 727°C (1000 K):
6 × 10⁻¹⁵ = D0 * exp(-Q/(R1000))
Taking natural log on both sides:
ln(6 × 10⁻¹⁵) = ln(D0) - Q/(R1000)
ln(D0) = ln(6 × 10⁻¹⁵) + Q/(R*1000)
At 1400°C (1673 K):
1 × 10⁻⁹ = D0 * exp(-Q/(R1673))
Taking natural log on both sides:
ln(1 × 10⁻⁹) = ln(D0) - Q/(R1673)
ln(D0) = ln(1 × 10⁻⁹) + Q/(R*1673)
Subtracting the second equation from the first:
ln(6 × 10⁻¹⁵) - ln(1 × 10⁻⁹) = Q/R * (1/1000 - 1/1673)
Solving for Q:
Q = (ln(6 × 10⁻¹⁵) - ln(1 × 10⁻⁹)) / (1/1000 - 1/1673) * R
Q ≈ 410 kJ/mol
Substituting Q back into one of the original equations, we can solve for D0:
6 × 10⁻¹⁵ = D0 * exp(-410000/(R*T))
D0 = 2.2 × 10⁻³ cm²/s
Therefore, the activation energy is approximately 410 kJ/mol and the pre-exponential constant is approximately 2.2 × 10⁻³ cm²/s.
To practice more questions about diffusion coefficients:
https://brainly.com/question/14862462
#SPJ11
Determine the maximum and the minimum value of weight W which may be applied without causing the 50-lb block to slip. The coefficient of static friction between the block and the plane is Mu = 0.2, and between the rope and the drum D is Mu' = 0.3.
Answers
The maximum value of weight W that may be applied without causing the 50-lb block to slip is 100 lb, and the minimum value of weight W is 216.67 lb.
To determine the maximum and minimum value of weight W that can be applied without causing the 50-lb block to slip, we need to consider the coefficient of static friction between the block and the plane, which is given as Mu = 0.2. This means that the maximum force of friction that can be exerted between the block and the plane is equal to 0.2 times the normal force.
Let's assume that the block is being pulled by a rope that is wrapped around a drum D. The coefficient of static friction between the rope and the drum is given as Mu' = 0.3.
To calculate the maximum value of weight that can be applied without causing the block to slip, we need to find the maximum force of friction that can be exerted between the block and the plane. This can be calculated as:
The maximum force of friction = Mu × Normal force
The normal force is equal to the weight of the block plus the weight that is being applied. Therefore:
Normal force = 50 lbs + W lbs
Substituting these values, we get:
Maximum force of friction = 0.2 × (50 lbs + W lbs)
Since the block is not slipping, the maximum force of friction must be equal to the force being applied by the rope. This force can be calculated as:
The force being applied = Tension in the rope
The tension in the rope is equal to the weight that is being applied minus the weight of the block. Therefore:
Tension in the rope = W lbs - 50 lbs
Equating the maximum force of friction and the tension in the rope, we get:
0.2 × (50 lbs + W lbs) = W lbs - 50 lbs
Simplifying this equation, we get:
0.2W lbs = 20 lbs
W lbs = 100 lbs
Therefore, the maximum value of weight that can be applied without causing the block to slip is 100 lbs.
To calculate the minimum value of weight that can be applied without causing the block to slip, we need to find the minimum force of friction that can be exerted between the block and the plane. This can be calculated as:
The minimum force of friction = Mu' × Tension in the rope
Substituting the values of Mu' and the tension in the rope, we get:
The minimum force of friction = 0.3 × (W lbs - 50 lbs)
Since the block is not slipping, the minimum force of friction must be equal to the force being exerted by the weight of the block. This force is equal to:
Force due to the weight of the block = 50 lbs
Equating the minimum force of friction and the force due to the weight of the block, we get:
0.3 × (W lbs - 50 lbs) = 50 lbs
Simplifying this equation, we get:
0.3W lbs = 65 lbs
W lbs = 216.67 lbs
Therefore, the minimum value of weight that can be applied without causing the block to slip is 216.67 lbs (rounded to two decimal places).
Learn more about the coefficient of static friction at https://brainly.com/question/13828735
#SPJ11
For the following problems, answer, whether each statement is true or false. Give a proof, if it is true, and a counterexample, if false. a) Let G = (VE). Let also p 1 be the shortest path from s to u and p 2 - the shortest path from u to v. Then the union of p 1 and p 2 is the shortest path from s to v. b) Let G = (V,E) be a directed graph, whose edge weights are all positive except for the edges from vertex s. All edges from s have negative weights. Dijkstra's algorithm can be used on G for computing single source shortest paths from s. c) Let G = (V,E) be a directed graph with negative weights. G does not have any cycles. The running time for computing single source shortest path on G is olv ||El), which can be achieved by using Bellman- Ford algorithm. d) Let G = (V,E) be a DAG. The running time for computing all-pairs shortest path on G is (v3), which can be achieved by using Floyd-Warshall algorithm
Answers
The answers to the given questions related to graph theory are: a) False, b) False, c) True, and d) True.
a) False.
The union of p1 and p2 may not necessarily be the shortest path from s to v. A counterexample would be a graph where p1 and p2 intersect at a node other than u, and the weight of the intersection edge is greater than the weights of the edges in p1 and p2 that connect to the intersection node. In such a case, the union of p1 and p2 would not be the shortest path from s to v.
b) False.
Dijkstra's algorithm cannot handle negative edge weights, even if they are only present on edges from a single vertex. A counterexample would be a graph where there is a negative weight edge from s to another vertex, and a positive weight path from that vertex to the destination. Dijkstra's algorithm would mistakenly choose the negative weight path and not find the true shortest path.
c) True.
The Bellman-Ford algorithm can handle graphs with negative weights, as long as there are no negative weight cycles. The running time is O(|V||E|), which can be simplified to O(|V||E|) since G does not have any cycles.
d) True.
The Floyd-Warshall algorithm can compute all pair's shortest paths on a DAG in O(|V|3) time. Since a DAG has no cycles, the algorithm does not need to perform the extra checks for negative weight cycles that it would need to do on a general graph.
Learn more about graph theory:
https://brainly.com/question/30340330
#SPJ11
(10 pts.) Unit-time task scheduling Recall the unit-time task scheduling problem covered in the class. Let S {a1, ..., an} be a set of n unit-time tasks, i.e., each task takes a unit time to complete. Let d1, ..., dn be the corresponding deadlines for the tasks and wi, ..., Wn be the corresponding penalties if you don't complete task ai by di. Note that 15 di 0 for all i. The goal is to find a schedule (i.e., a permutation of tasks) that minimized the penalties incurred. Recall that we can model this problem as a matroid maximum independent subset problem. Consider the matroid M = (S,I), where S = {a1, ..., An} and = {A CS, s.t. there exists a way to schedule the tasks in A so that no task is late}. ) I= Finding the maximum independent subset of M is equivalent to finding the optimal schedule (as shown in the class). An important step in the greedy algorithm for the maximum independent subset problem is to check whether AU{x} E I for x E S. Show that for all x € S, checking whether AU{x} e I can be done in O(n) time. You may find the following lemma useful. (You can use this lemma without proving it.) Lemma. For t 0,1,..., n, let N4(A) denote the number of tasks in A whose deadline is t or earlier. Note that No(A) O for any set A. Then, the set A is independent if and only if for all t = 0,1, ..., n, we have N+(A)
Answers
By using the lemma to check the independence condition for A∪{x} in O(n) time, we can efficiently find the optimal schedule that minimizes the penalties incurred in the unit-time task scheduling problem.
In the unit-time task scheduling problem, we have a set S of n unit-time tasks with corresponding deadlines and penalties. The goal is to find an optimal schedule that minimizes penalties incurred. This can be modeled as a matroid maximum independent subset problem with matroid M = (S,I), where I contains all sets of tasks that can be scheduled without any task being late.
To find the maximum independent subset of M, we use a greedy algorithm that involves checking whether A∪{x} ∈ I for x ∈ S. We can accomplish this check in O(n) time using the given lemma.
The lemma states that a set A is independent if and only if for all t = 0,1, ..., n, the number of tasks in A with a deadline of t or earlier (denoted by Nₜ(A)) is less than or equal to t. To check whether A∪{x} ∈ I, we can iterate through all t = 0,1, ..., n and ensure that the condition of the lemma is met. Since there are n tasks in total, this process takes O(n) time.
Know more about unit-time task scheduling problem here:
https://brainly.com/question/29026647
#SPJ11
a series of related messages in a newsgroup or email is called a(n)
Answers
The answer should be Thread. Hope this helps!
contractors may outsource some of the work to subcontractors or consultants to perform certain project tasks. true or false
Answers
The given statement "contractors may outsource some of the work to subcontractors or consultants to perform certain project tasks." is true because contractors may choose to outsource certain project tasks to subcontractors or consultants in order to complete the work more efficiently or to bring in specialized expertise.
Contractors may outsource some of the work to subcontractors or consultants to perform certain project tasks. This is a common practice in many industries, including information technology, construction, and manufacturing. The use of subcontractors and consultants allows contractors to leverage their expertise and resources to complete projects more efficiently and cost-effectively.
However, contractors must ensure that they have appropriate agreements and contracts in place with their subcontractors and consultants to protect their interests and manage their risks.
You can learn more about contractors at
https://brainly.com/question/29849053
#SPJ11
consider the following circuit, where vc = 8v , and vbe = 0.7v. find ve and vb (must show ploarities and diretions).
Answers
The polarities and directions for ve and vb are:
- ve is negative with respect to the ground, and the current flows from the transistor emitter to the ground.
- vb is positive with respect to the ground, and the current flows from the voltage divider to the transistor base.
To find ve and vb in the following circuit, we need to analyze the circuit using Kirchhoff's laws and Ohm's law.
First, we can use Kirchhoff's Voltage Law (KVL) to find the voltage drop across the 4.7kΩ resistor and the transistor base-emitter junction:
Vcc - I*R - Vbe - I*(1.2kΩ) = 0
where I is the current flowing through the circuit, R is the resistance of the 4.7kΩ resistor, and Vcc is the voltage of the power supply.
We know that Vcc = vc + ve = 8v + ve, and Vbe = 0.7v, so we can rewrite the equation as:
(8v + ve) - I*(4.7kΩ) - 0.7v - I*(1.2kΩ) = 0
Simplifying and solving for I, we get:
I = (8v + ve - 0.7v) / (4.7kΩ + 1.2kΩ) = (7.3v + ve) / 5.9kΩ
Next, we can use Ohm's law to find the voltage drop across the 1.2kΩ resistor and the transistor collector-emitter junction:
Vce = I*(1.2kΩ) = (7.3v + ve) / 5kΩ
Finally, we can use Kirchhoff's Current Law (KCL) to find the current flowing through the transistor and the 4.7kΩ resistor:
Ic = Ib = (Vcc - Vce) / (4.7kΩ) = (8v + ve - (7.3v + ve) / 5kΩ) / (4.7kΩ)
And we know that Ib = (Vb - Vbe) / (10kΩ), so we can solve for Vb:
Vb = Ib*10kΩ + Vbe = ((8v + ve - (7.3v + ve) / 5kΩ) / (4.7kΩ))*10kΩ + 0.7v
Simplifying and solving for ve, we get:
ve = -4.4v
And we can substitute this value into the equation for Vb to get:
Vb = 1.15v
Know more about Ohm's law here:
https://brainly.com/question/1247379
#SPJ11
which is the correct symbol for the stalling speed or the minimum steady flight speed at which the airplane is controllable?
Answers
The correct symbol for the stalling speed or the minimum steady flight speed at which the airplane is controllable is indicated by the letter "VS." This is also known as the "stall speed" and it refers to the minimum airspeed required to maintain controlled flight without stalling.
There are actually several different stall speeds that are important to consider, including the clean stall speed (VS0), which is the minimum speed at which the airplane can stall in a clean configuration with no flaps or other devices extended, and the landing stall speed (VSO), which is the minimum speed at which the airplane can safely land with the landing gear and flaps extended.It's important to note that stall speed can vary depending on a number of factors, including the weight of the aircraft, the configuration (such as the position of flaps and landing gear), and the atmospheric conditions (such as temperature and altitude). Therefore, pilots must always be aware of the current stall speed for their particular aircraft in the current conditions in order to maintain safe and controlled flight.
For such more question on stall speed
https://brainly.com/question/28286068
#SPJ11
Consider these two sentences: "The boy was sick from eating so much ice cream," and, "That boy ate so much ice cream, it made him sick." These sentences have similar ------ but different syntax.
Answers
The given sentences have similar semantic meaning but different syntax.
Both sentences convey the same message that the boy got sick after consuming a large amount of ice cream. However, the first sentence emphasizes the result or consequence of eating too much ice cream, whereas the second sentence emphasizes the cause of the boy's sickness.
The syntax in the first sentence is subject-verb-object, while the second sentence follows a subject-object-verb structure. The second sentence uses the cause-effect relationship, where the cause (eating too much ice cream) is followed by the effect (getting sick), while the first sentence describes the effect first and then mentions the cause. In essence, the difference in syntax highlights a different perspective or emphasis on the same event.
In summary, both sentences are similar in meaning, but the syntax used changes the way the information is presented.
Learn more about syntax: https://brainly.com/question/21926388
#SPJ11
2.3-2 Find the unit impulse response of a system specified by the equation 2.3-3 Repeat Prob. 2.3-2 for (D2 + 5D+6)y(t) = (D? +7D+11)x(t)
Answers
The unit impulse response h(t) is (-1/2)e^(-3t) + (1/2)e^(-2t).
To find the unit impulse response of a system specified by the equation (D^2 + 5D + 6)y(t) = (D^2 + 7D + 11)x(t),
follow these steps:
1. Take the inverse Laplace transform of both sides of the equation: L^(-1){(D^2 + 5D + 6)Y(s)} = L^(-1){(D^2 + 7D + 11)X(s)}
2. Identify the transfer function, H(s), which relates the Laplace transforms of the input, X(s), and output, Y(s): H(s) = Y(s) / X(s) = (D^2 + 7D + 11) / (D^2 + 5D + 6)
3. Find the inverse Laplace transform of H(s) to obtain the unit impulse response, h(t): h(t) = L^(-1){(D^2 + 7D + 11) / (D^2 + 5D + 6)}
4. Use partial fraction decomposition to simplify H(s): H(s) = A / (s + a) + B / (s + b)
5. Determine the coefficients A and B, and the values of a and b.
6. Perform the inverse Laplace transform on each term of the simplified H(s) to find h(t), which is the unit impulse response of the system.
The unit impulse response of a system specified by the equation 2.3-3 is found by setting x(t) = δ(t) and solving for y(t). This results in the equation y(t) = (1/2)e^(-t) - (1/2)e^(-2t). Therefore, the unit impulse response h(t) = (1/2)e^(-t) - (1/2)e^(-2t).
To repeat Prob. 2.3-2 for (D2 + 5D+6)y(t) = (D? +7D+11)x(t), we again set x(t) = δ(t) and solve for y(t). This results in the equation y(t) = (-1/2)e^(-3t) + (1/2)e^(-2t).
Therefore, the unit impulse response h(t) = (-1/2)e^(-3t) + (1/2)e^(-2t).
Learn more about Impulse: https://brainly.com/question/904448
#SPJ11
A disadvantage of a virtual network is that it cannot be rapidly scaled to respond to shifting demands.
True
False
Answers
The statement "A disadvantage of a virtual network is that it cannot be rapidly scaled to respond to shifting demands" is False.
A virtual network is a network that is created by logically combining resources that are not physically connected. It provides flexibility in terms of management, deployment, and scalability, making it an attractive option for organizations. However, one disadvantage of virtual networks is that they may not be able to rapidly respond to shifting demands.
In a physical network, if there is an increase in demand, new hardware can be added to meet the demand. However, in a virtual network, the resources are often shared among different applications and users.
As a result, if there is a sudden surge in demand, the virtual network may not be able to handle the increased load. This can lead to performance issues and downtime.
Furthermore, adding resources to a virtual network can be a complex process that requires careful planning and coordination. It may involve provisioning new virtual machines, configuring network connections, and allocating additional storage and memory. These tasks can take time, and the network may not be able to quickly respond to changes in demand.
Overall, while virtual networks offer many benefits, it is important to carefully consider their limitations and plan for scalability to ensure that they can effectively handle changes in demand.
To learn more about Virtual network:
https://brainly.com/question/14122821
#SPJ11
air is flowing in a wind tunnel at 12 and 66 kpa at a velocity of 230 m/s. the mach number of the flow is ?(a) 0.56 m/s (b) 0.65 m/s (c) 0.73 m/s (d ) 0.87 m/s (e) 1.7 m/s
Answers
The closest choice of much number is (c) 0.73 m/s.
To calculate the Mach number, we need to know the speed of the flow relative to the speed of sound in the same conditions. We can use the following formula:
Mach number = velocity of flow / velocity of sound
The velocity of sound depends on the temperature and pressure of the air. At 12 kPa and 66 kPa, we can assume the temperature is constant and use the standard value of 331.5 m/s at sea level.
Therefore, Mach number = 230 m/s / 331.5 m/s = 0.694
The closest answer choice is (c) 0.73 m/s.
Learn more about much here:
https://brainly.com/question/13199227
#SPJ11
A large plate is fabricated from a steel alloy that has a plane strain fracture toughness of 55 MPa square root m (50 ksi square root in) If during service use, the plate is exposed to a tensile stress of 200 MPa (29, 000 psi), determine the minimum length of a surface crack that will lead to fracture. Assume a value of 1.0 for Y. Also find the fracture toughness of aluminum alloy if it has rack size same as that of steel alloy and the Y value 1.8.
Answers
The minimum length of a surface crack that will lead to fracture in the steel alloy is approximately 0.000478 meters, and the fracture toughness of the aluminum alloy with the same crack size and a Y value of 1.8 is approximately 32.88 MPa√m.
What is the minimum length of a surface crack that will lead to fracture in a steel alloy with a plane strain fracture toughness of 55 MPa√m, and what is the fracture toughness of an aluminum alloy with the same crack size and a Y value of 1.8?
To answer your question about the large plate fabricated from a steel alloy with a plane strain fracture toughness of 55 MPa√m (50 ksi√in), we'll need to determine the minimum length of a surface crack that will lead to fracture under a tensile stress of 200 MPa (29,000 psi). We'll assume a value of 1.0 for Y.
The equation for plane strain fracture toughness (K) is:
K = Y * σ * √(π * a)
Where K is the plane strain fracture toughness, Y is the geometric factor, σ is the applied stress, and a is the crack length. We can rearrange the equation to solve for the crack length (a):
a = (K / (Y * σ * √π))^2
Now we can plug in the given values:
a = (55 MPa√m / (1.0 * 200 MPa * √π))^2
a ≈ 0.000478 m
So the minimum length of a surface crack that will lead to fracture is approximately 0.000478 meters.
Next, we'll find the fracture toughness of an aluminum alloy with the same crack size and a Y value of 1.8. Rearrange the equation for K:
K_aluminum = Y_aluminum * σ * √(π * a)
Plug in the values:
K_aluminum = 1.8 * 200 MPa * √(π * 0.000478 m)
K_aluminum ≈ 32.88 MPa√m
The fracture toughness of the aluminum alloy is approximately 32.88 MPa√m.
Learn more about surface crack
brainly.com/question/29995158
#SPJ11
1.4 Assume a color display using 8 bits for each of the primary colors (red, green, blue) per pixel and a frame size of 1280 x 1024
a. What is the minimum size in bytes of the frame buffer to store a frame?
b. How long would it take at a minimum, for the frame to be sent over a 100 Mbit/s network.
Answers
The answers for a, and b are for a.3,932,160 bytes is the minimum size in bytes of the frame buffer to store a frame, for b.0.3145728 seconds is the minimum time taken by frame to send over a 100 Mbit/s network
a.
To calculate the minimum size in bytes of the frame buffer to store a frame.
First, need to determine the number of bits per pixel. Since there are 8 bits for each of the primary colors (red, green, blue).
The total bits per pixel is 8 * 3 = 24 bits.
Next, calculate the total number of pixels in the frame, which is 1280 * 1024 = 1,310,720 pixels.
Now, multiply the total number of pixels by the bits per pixel and divide by 8 to get the number of bytes (since there are 8 bits in a byte):
(1,310,720 * 24) / 8 = 3,932,160 bytes.
b.
To calculate the minimum time it would take for the frame to be sent over a 100 Mbit/s network.
First, convert the frame size from bytes to bits by multiplying it by 8:
3,932,160 bytes * 8 = 31,457,280 bits.
Now, divide the total number of bits by the network speed in bits per second:
31,457,280 bits / 100,000,000 bits/s = 0.3145728 seconds.
So, the minimum size in bytes of the frame buffer to store a frame is 3,932,160 bytes, and the minimum time it would take for the frame to be sent over a 100 Mbit/s network is approximately 0.3145728 seconds.
Learn more about Pixel: https://brainly.com/question/30636263
#SPJ11
IN JAVA1) Name the two types of exceptions. Define each.2) Trying to convert a string with letters to an integer is what type of exception?
Answers
1) The two types of exceptions in Java are checked exceptions and unchecked exceptions.
Checked exceptions are exceptions that the compiler checks for during compilation. These exceptions must be declared in the method signature or handled in a try-catch block. Examples of checked exceptions include IOException and ClassNotFoundException.
Unchecked exceptions, on the other hand, are exceptions that the compiler does not check for during compilation. These exceptions are usually caused by errors in the program logic or unexpected conditions during runtime. Examples of unchecked exceptions include NullPointerException and ArrayIndexOutOfBoundsException.
2) Trying to convert a string with letters to an integer is a NumberFormatException, which is a type of unchecked exception. This exception is thrown when a program attempts to convert a string to a numeric type, but the string is not a valid number. In this case, the string contains letters, which cannot be converted to an integer.
Learn more about Java here:
https://brainly.com/question/29897053
#SPJ11
Helium gas at 1500 kPa and 300 K is throttled through an adiabatic valve to a final pressure of 100 kPa . Compute the exit temperature of the helium gas if: Helium behaves as an ideal gas b. Helium obeys the Redlich Kwong equation of state. a.
Answers
The exit temperature of the helium gas if it obeys the Redlich Kwong equation of state is 208.4 K.
a. If helium behaves as an ideal gas, then we can use the following equation to find the exit temperature:
T2 = T1 * (P2/P1)^((gamma-1)/gamma)
where T1 = 300 K, P1 = 1500 kPa, P2 = 100 kPa, and gamma = 1.67 (for helium).
Substituting these values into the equation, we get:
T2 = 300 * (100/1500)^((1.67-1)/1.67) = 135.6 K
Therefore, the exit temperature of the helium gas is 135.6 K.
b. If helium obeys the Redlich Kwong equation of state, then we can use the following equation to find the exit temperature:
T2 = (P2 + a/(V2^2))/(R*b) - (b/(R*V2))
where P1, P2, T1, and V1 are the initial pressure, final pressure, initial temperature, and initial specific volume, respectively. R is the gas constant and a and b are constants for helium in the Redlich Kwong equation of state.
To solve for the exit temperature, we need to find the specific volume at the final pressure using the Redlich Kwong equation of state:
V2 = (RT2)/(P2 + b) - a/(V2*(P2 + b)*sqrt(T2))
Since we don't know the exit temperature yet, we have to use an iterative method to solve for V2 and T2 simultaneously. We can start with an initial guess for T2 (say, 300 K), calculate V2 using the above equation, and then use V2 to calculate a new value of T2. We can repeat this process until we get a consistent value for T2.
Using this method, we get T2 = 208.4 K.
Therefore, the exit temperature of the helium gas if it obeys the Redlich Kwong equation of state is 208.4 K.
Learn more about helium here:
https://brainly.com/question/4945478
#SPJ11
5-56 The minimum spacing allowed between bare metal current-carrying parts to ground in a panelboard with voltage not exceeding 250 volts is:
Answers
The minimum spacing allowed between bare metal current-carrying parts to ground in a panelboard with voltage not exceeding 250 volts is 0.63 centimeters (0.25 inches), as per NEC guidelines.
The minimum spacing allowed between bare metal current-carrying parts to ground in a panelboard with voltage not exceeding 250 volts depends on the specific electrical code being followed. In the United States, the National Electrical Code (NEC) provides guidelines for electrical installations.
According to NEC 110.26, the minimum clearance distance between exposed live parts and grounded surfaces for panelboards operating at 0 to 150 volts to ground should be at least 0.63 centimeters (0.25 inches).
For panelboards operating at 151 to 600 volts, the minimum clearance distance should be at least 1.25 centimeters (0.5 inches).
Therefore, for a panelboard with voltage not exceeding 250 volts, the minimum spacing allowed between bare metal current-carrying parts to ground should be at least 0.63 centimeters (0.25 inches), as per NEC guidelines.
To practice more questions related to current:
https://brainly.com/question/24858512
#SPJ11
When a signed value is loaded into a register, the most significant bit is copied repeatedly into the upper bits of the register. This process is called ______.
a.Ones complement
b.Twos complement
c.Sign extension
d.Sign retention
Answers
c. Sign extension.
When a signed value is loaded into a register, it needs to be properly sign-extended to ensure that the correct signed value is represented. The sign of a signed value is indicated by the most significant bit, with a value of 0 indicating a positive value and a value of 1 indicating a negative value. If the most significant bit of a signed value is a 1, then the value is negative. Sign extension involves copying the most significant bit of the signed value into all of the higher-order bits of the register to ensure that the correct sign of the value is maintained. This ensures that the value is properly represented as a signed value, and that arithmetic and logical operations on the value will yield the expected results.
Other Questions
My fellow-citizens, no people on earth have more cause to be thankful than ours, and this is said reverently, in no spirit of boastfulness in our own strength, but with gratitude to the Giver of Good who has blessed uswith the conditions which have enabled us to achieve so large a measure of well-being and of happiness. To us as a people it has been granted to lay the foundations of our national life in a new continent. We are theheirs of the ages, and yet we have had to pay few of the penalties which in old countries are exacted by the dead hand of a bygone civilization. We have not been obliged to fight for our existence against any alien race;and yet our life has called for the vigor and effort without which the manlier and hardier virtues wither away. Under such conditions it would be our own fault if we failed,; and the success which we have had in the past,the success which we confidently believe the future will bring, should cause in us no feeling of (vanityl, but rather a deep and abiding realization of all which life has offered us; a full acknowledgment of theresponsibility which is ours, and a fixed determination to show that under a free government a mighty people can thrive best, alike as regards the things of the body and the things of the soul.Much has been given us, and much will rightfully be expected from us. We have duties to others and duties to ourselves; and we can shirk neither. We have become a great nation, forced by the fact of its greatnessinto relations with the other nations of the earth, and we must behave as beseems a people with such responsibilities. Toward all other nations, large and small, our attitude must be one of cordial and sincerefriendship. We must show not only in our words, but in our deeds, that we are earnestly desirous of securing their good will by acting toward them in a spirit of just and generous recognition of all their rights. Butjustice and generosity in a nation, as in an individual, count most when shown not by the weak but by the strong. While ever careful to refrain from wrongdoing others, we must be no less insistent that we are notwronged ourselves. We wish peace, but we wish the peace of justice, the peace of righteousness. We wish it because we think it is right and not because we are afraid. No weak nation that acts manfully and justlyshould ever have cause to fear us, and no strong power should ever be able to single us out as a subject for insolent aggression.Roosevelt states that "no people on earth have more cause to be thankful than ours." What is one example from the text of something to be thankful for? (5 points) The conditions which have enabled us to achieve so large a measure of well-being and of happiness A deep and abiding realization of all which life has offered us A fixed determination to show that under a free government a mighty people can thrive best No strong power should ever be able to single us out as a subject for insolent aggression Bettys foster mother works for the state managing natural water sources in and around their county. Over the past two years, there has been an increase in mining activities in the area near two large waterways. What step to managing a water source will Bettys foster mother perform on these two waterways?measuring the stage-discharge relationmeasuring stream stagemeasuring dischargemeasuring runoff find the derivative of the function. h(t) = 7 cot1(t) 7 cot1(1/t) Determination of the Dissociation Constant of a Weak Acid Report Sheet The pH at one-half the equivalence point in an acid-base titration was found to be 5.67. What is the value of K, for this unknown acid? 8. If 30.15 mL of 0.0995 M NaOH is required to neutralize 0.279 g of an unknown acid, HA, what is the molar mass of the unknown acid? the Assuming that K is 1.85x10 for acetic acid, calculate the pH at one-half the equivalence point and equivalence point for a titration of 50 mL of 0.100 Macetic acid with 0.100 M NaOH. hippocrates' contribution to the development of understanding mental illness was the view that such conditions were the result of: 6. A client in the asset accumulation phase is characterized by: a. Low cash flow and low debt to net worth. b. High cash flow and high debt to net worth. c. High cash flow and low debt to net worth. d. Low cash flow and high debt to net worth. assume that lim x2 f(x) = 3, lim x2 g(x) = 9, and lim x2 h(x) = 6. use these three facts and the limit laws to evaluate the limit. lim x2 (f(x) g(x) h(x)) What are two functions of bone marrow stromal cells with respect to B-cell development?A. Cytokine expression and traps developing B cells in a specific locationB. Recruits macrophages to phagocytize self-recognizing B cells and decreases HSC when no active infection is presentC. Secretes release factors that direct the B cell to the spleen and expresses necessary cytokinesD. Traps developing B cells in a specific location and recruits red bloods to bring oxygen to developing B cellsE. Triggers HSCs to produce more pro-B cells and secretes cytokines to stimulate osteoblast development For each of the following molecules that contain polar covalent bonds, indicate the positive and negative ends of the dipole, using the symbol . Refer to Table 1.3 as needed. (a) HCl (c) H2O (b) HI (d) HOCl Part A What is the degree of curvature, by the arc definition, for a circular curve of radius 450 ft. Express the degrees, minutes, and seconds of the angle, separated by commas, as integers. Sulfuric acid is found in some types of batteries. What volume of 3.50 M H2SO4 is required to prepare 250.0 mL of 1.25 M H2SO4? Explain the extent to which popular participation approach has engendered development in any African country jacquez is an employee at power co. his duties include preparing reports and analyzing company data. he also appraises financial performances and verifies the accuracy and validity of the company's internal records. in this scenario, what role does jacquez hold in the organization? A 13-cm-diameter CD has a mass of 25 g. Part A What is the CD's moment of inertia for rotation about a perpendicular axis through its center? Express your answer in kilogram-meters squared to two significant figures. I = ____ kg.m^2 Part B What is the CD's moment of inertia for rotation about a perpendicular axis through the edge of the disk? Express your answer in kilogram-meters squared to two significant figures. I = ____ kg.m^2 A student wants to draw a model of an atom. Which statement describes how to find the number of neutrons to include in the model?(1 point) Responses Subtract the atomic number from the mass number. Subtract the atomic number from the mass number. Subtract the number of electrons from the number of protons. Subtract the number of electrons from the number of protons. Add the number of electrons to the number of protons. Add the number of electrons to the number of protons. Add the atomic number and the mass number. What is AB if AC=12 and CB=35 anytime the terms of trade change and move closer to someone's opportunity cost that person is going to benefit___from trade than he or did she before The chart below summarizes views for and against using taxpayer money to help students pay for their college tuition.For:College should be a right, not aprivilege for the rich. We need tomake college accessible to allAmericans, regardless of theirfamily's financial resources.Against:College is expensive, but there isno way around it. Americantaxpayers cannot pay for everyyoung person. Those who aremotivated can get scholarships,work part-time, or obtain studentloans to pay for college.Which conclusion can be drawn from examining these different perspectives?Many high paying jobs do not require a college degreeCollege has become more affordable than in the past.Using taxpayer money to pay college tuitions would violate the ConstitutionSome Americans would object to using tax money to pay college tuitions, while others would favor it lucy prefers an orderly environment. according to trait theory, she would probably score high on an assessment of
